memorandum
FrontPage
管理
ヘルプ
MRTGで温度監視
をテンプレートにして作成
開始行:
* HDDの温度監視 [#q4a5e5af]
** smartmontoolsのインストール [#s8cc8cd3]
# apt-get install smartmontools
パッケージリストを読みこんでいます... 完了
依存情報ツリーを作成しています... 完了
以下のパッケージが新たにインストールされます:
smartmontools
アップグレード: 0 個, 新規インストール: 1 個, 削除: 0 個...
351kB のアーカイブを取得する必要があります。
展開後に 608kB のディスク容量が追加消費されます。
取得:1 http://updates.vinelinux.org 3.1/i386/plus smartm...
351kB を 1s 秒で取得しました (196kB/s)
変更を適用しています...
Preparing... ############################...
Note that you can use a configuration file /etc/smartd.c...
startup behavior of the smartd daemon. See man 8 smartd...
Run "/sbin/chkconfig --add smartd", to start smartd serv...
1:smartmontools ############################...
Run "/etc/rc.d/init.d/smartd start" to start smartd serv...
完了
**/dev/hdaの情報を表示 [#gb765256]
# smartctl -a /dev/hda
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) ...
Home page is http://smartmontools.sourceforge.net/
:
:
193 Load_Cycle_Count 0x0012 100 100 050 ...
194 Temperature_Celsius 0x0002 122 122 000 ...
196 Reallocated_Event_Count 0x0032 100 100 000 ...
:
:
>194 Temperature_Celsius・・・が表示されればOKです。右っ...
**温度取得スクリプトの作成 [#ndbfe556]
/usr/sbin/smartctl -A /dev/hdaの結果から温度の値のみをス...
# vi /usr/local/mrtg-2/hdd_temp.sh
>新規に作成します。
#!/bin/sh
/usr/sbin/smartctl -A /dev/hda|grep Temperature_Celsius|...
MRTGは入力が2系統なためprintで同じデータを2つ出力していま...
実行権限を与える
# chmod 755 /usr/local/mrtg-2/hdd_temp.sh
**mrtg.cfgの編集 [#xd146d27]
# vi /usr/local/mrtg-2/lib/mrtg.cfg
>追加
### HDD Temperature ###
Target[htemp]: `/usr/local/mrtg-2/hdd_temp.sh`
MaxBytes[htemp]: 56
Options[htemp]: gauge, growright, absolute, integer, nop...
Unscaled[htemp]: dwmy
YLegend[htemp]: Temperature
ShortLegend[htemp]: deg.
LegendI[htemp]: TEMP
LegendO[htemp]: TEMP
Legend1[htemp]: HDD温度
Legend2[htemp]: HDD温度
Title[htemp]: HDDの温度
PageTop[htemp]: <H1>HDDの温度</H1>
**実行 [#v037865c]
# /usr/local/mrtg-2/bin/mrtg /usr/local/mrtg-2/lib/mrtg....
**インデックスページを作る [#rf8d606a]
# /usr/local/mrtg-2/bin/indexmaker --columns=1 \
--addhead="<META HTTP-EQUIV=\"Content-Type\" CONTENT=\"t...
/usr/local/mrtg-2/lib/mrtg.cfg > /home/httpd/html/mrtg/i...
*CPUの温度監視 [#r44d9d48]
ハードウェアのセンサ情報を取得するにはI2CとLM Sensorsが必...
初め、最新のI2C 2.9.1 と LM Sensors 2.9.1 でやったがうま...
ちなみに、PCはHITACHI FLORA 330 DK3です。このPCはACERのOE...
**lm_sensorsのインストール [#d21df0d6]
http://secure.netroedge.com/%7Elm78/index.html
# wget http://secure.netroedge.com/%7Elm78/archive/lm_se...
--16:37:54-- http://secure.netroedge.com/%7Elm78/archiv...
=> `lm_sensors-2.7.0.tar.gz'
secure.netroedge.com をDNSに問いあわせています... 206.22...
secure.netroedge.com[206.228.191.3]:80 に接続しています....
HTTP による接続要求を送信しました、応答を待っています......
長さ: 595,379 [application/x-tar]
100%[==============================================>] 59...
16:37:58 (156.57 KB/s) - `lm_sensors-2.7.0.tar.gz' を保...
# tar zxf lm_sensors-2.7.0.tar.gz
# cd lm_sensors-2.7.0
makeするのに.configファイルが必要なので、自分のマシンに合...
# ls /usr/src/linux/configs/
kernel-2.4.27-athlon-smp.config kernel-2.4.27-i586-smp....
kernel-2.4.27-athlon.config kernel-2.4.27-i586.config
kernel-2.4.27-i386-BOOT.config kernel-2.4.27-i686-smp....
kernel-2.4.27-i386-smp.config kernel-2.4.27-i686.config
kernel-2.4.27-i386.config
# cp /usr/src/linux/configs/kernel-2.4.26-i686.config /u...
# make
# make install
**センサの自動検出 [#c9bf8d37]
# prog/detect/sensors-detect
適当にEnterを押していく。
**起動してみる [#bdda57fd]
# prog/init/lm_sensors.init start
Starting up sensors: starting module __i2c-sis630__
starting module __i2c-isa__
starting module __eeprom__
starting module __sis5595__
starting module __it87__
...
-起動しない場合
# vi /etc/ld.so.conf
>に以下を追加
/usr/local/lib
<
# ldconfig
**センサ情報を見る [#oef3eab1]
# sensors
eeprom-i2c-0-50
Adapter: SMBus SIS630 adapter at f080
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 128
eeprom-i2c-0-51
Adapter: SMBus SIS630 adapter at f080
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 256
it87-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +1.74 V (min = +1.53 V, max = +1.87 V)
VCore 2: +2.56 V (min = +2.25 V, max = +2.75 V)
+3.3V: +6.64 V (min = +2.96 V, max = +3.60 V) A...
+5V: +5.17 V (min = +4.50 V, max = +5.48 V)
+12V: +11.84 V (min = +11.36 V, max = +13.80 V)
-12V: -27.36 V (min = -15.86 V, max = -13.40 V) A...
-5V: -13.64 V (min = -10.13 V, max = -9.44 V) A...
Stdby: +0.00 V (min = +4.50 V, max = +5.48 V) A...
VBat: +3.32 V
fan1: 0 RPM (min = 3000 RPM, div = 2) A...
fan2: 3924 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2)
Temp1/MB: +76庵 (min = +20庵, max = +60庵)
Temp2/CPU: -79庵 (min = +20庵, max = +60庵)
Temp3: +55庵 (min = +20庵, max = +60庵)
Tempの値が可笑しいので修正します。ITE8705Fのドキュメント...
# vi /etc/modules.conf
>に以下を追加
options it87 temp_type=0x31
temp_typeをいろいろ変えてみる。
-(抜粋)doc/chips/it87の表
Legal values:
sensor1 sensor2 sensor3 ...
------- ------- ------- ...
diode diode diode ...
diode diode thermistor ...
diode thermistor diode ...
diode thermistor thermistor ...
thermistor diode diode ...
thermistor diode thermistor ...
thermistor thermistor diode ...
thermistor thermistor thermistor ...
しかし自分のPCではtemp_typeをどうやってもTemp2とTemp3がま...
Temp1/MB: +39庵 (min = +20庵, max = +60庵)
Temp2/CPU: +95庵 (min = +20庵, max = +60庵)
Temp3: +55庵 (min = +20庵, max = +60庵)
仕方ないのでTemp1のデータのみ使う。上の結果ではTemp1/MBと...
**不要なモジュールを読み込まないようにする [#l15c8813]
logを見るとエラーが出ているので温度取得に関係ないモジュー...
# vi /etc/sysconfig/lm_sensors
>
#MODULE_0=i2c-sis630
MODULE_0=i2c-isa
#MODULE_2=eeprom
#MODULE_3=sis5595
MODULE_1=it87
**自動起動の設定 [#q5a025e2]
起動スクリプトのコピー
# cp prog/init/lm_sensors.init /etc/rc.d/init.d/lm_sensors
# chkconfig lm_sensors on
リブートして動作することを確認する。
**CPU温度値の取得 [#rebc4ab9]
CPUの温度は
# cat /proc/sys/dev/sensors/it87-isa-0290/temp1
60.0 20.0 35.0
を見ることでも得られる。
なので、ここの値をスクリプトで取得してMRTGに渡すことにす...
# vi /usr/local/mrtg-2/cpu_temp.sh
>新規に作成します。
#!/bin/sh
awk '{print int($3)}{print int($3)}' /proc/sys/dev/senso...
MRTGは入力が2系統なためprintで同じデータを2つ出力していま...
実行権限を与える
# chmod 755 /usr/local/mrtg-2/cpu_temp.sh
**mrtg.confの編集 [#i4f61bc4]
# vi /usr/local/mrtg-2/lib/mrtg.cfg
>追加
### CPU Temperature ###
Target[ctemp]: `/usr/local/mrtg-2/cpu_temp.sh`
MaxBytes[ctemp]: 48
Options[ctemp]: gauge, growright, absolute, integer, nop...
Unscaled[ctemp]: dwmy
YLegend[ctemp]: Temperature
ShortLegend[ctemp]: deg.
LegendI[ctemp]: TEMP
LegendO[ctemp]: TEMP
Legend1[ctemp]: CPU温度
Legend2[ctemp]: CPU温度
Title[ctemp]: CPUの温度
PageTop[ctemp]: <H1>CPUの温度</H1>
**実行 [#h33e3dd5]
# /usr/local/mrtg-2/bin/mrtg /usr/local/mrtg-2/lib/mrtg....
何回か実行してエラーが出なくなればOK。
**インディクスページの作成 [#u4828302]
# /usr/local/mrtg-2/bin/indexmaker --columns=1 \
--addhead="<META HTTP-EQUIV=\"Content-Type\" CONTENT=\"t...
/usr/local/mrtg-2/lib/mrtg.cfg > /home/httpd/html/mrtg/i...
*CPUの温度監視(ノートパソコンの場合) [#wbbf3e6d]
ノートパソコンの場合、センサチップが搭載されていない場合...
以下は、IBM Thinkpad X23(低電圧版モバイルPentium III-M 86...
Thinkpad X23では、ACPIによりCPUの温度を取得できる。
**モジュールを組み込む [#vbf33dc6]
ACPI関係のモジュールを探す
# modprobe -l |grep acpi
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/asus_acpi.o
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/processor.o
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/thermal.o
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/toshiba_acp...
/lib/modules/2.4.27-0vl7/kernel/drivers/hotplug/acpiphp.o
thermal.oが関係しそうなモジュールなので、
# modprobe thermal
とやると組み込める。
lsmodでthermalがあればOK。
# lsmod
Module Size Used by Tainted: P
thermal 8068 0
:
:
/proc/acpiにthermal_zoneが現れているはずなので、
# cat /proc/acpi/thermal_zone/THM0/temperature
temperature: 49 C
でCPUの温度が表示される。
ちなみに、
# modprobe processor
を組み込むと、/proc/acpiにprocessorが現れて、
# cat /proc/acpi/processor/CPU/performance
state count: 2
active state: P0
states:
*P0: 733 MHz, 12500 mW, 500 uS
P1: 466 MHz, 9500 mW, 500 uS
でCPUの情報などを確認できる。
起動時に自動的に組み込まれるように、
# vi /etc/rc.d/rc.local
> 一番下に追加
modprobe thermal
あとは、上と同じようにシェルスクリプトで値を取得してMRTG...
* コメント [#e6ca8bcc]
#comment
終了行:
* HDDの温度監視 [#q4a5e5af]
** smartmontoolsのインストール [#s8cc8cd3]
# apt-get install smartmontools
パッケージリストを読みこんでいます... 完了
依存情報ツリーを作成しています... 完了
以下のパッケージが新たにインストールされます:
smartmontools
アップグレード: 0 個, 新規インストール: 1 個, 削除: 0 個...
351kB のアーカイブを取得する必要があります。
展開後に 608kB のディスク容量が追加消費されます。
取得:1 http://updates.vinelinux.org 3.1/i386/plus smartm...
351kB を 1s 秒で取得しました (196kB/s)
変更を適用しています...
Preparing... ############################...
Note that you can use a configuration file /etc/smartd.c...
startup behavior of the smartd daemon. See man 8 smartd...
Run "/sbin/chkconfig --add smartd", to start smartd serv...
1:smartmontools ############################...
Run "/etc/rc.d/init.d/smartd start" to start smartd serv...
完了
**/dev/hdaの情報を表示 [#gb765256]
# smartctl -a /dev/hda
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) ...
Home page is http://smartmontools.sourceforge.net/
:
:
193 Load_Cycle_Count 0x0012 100 100 050 ...
194 Temperature_Celsius 0x0002 122 122 000 ...
196 Reallocated_Event_Count 0x0032 100 100 000 ...
:
:
>194 Temperature_Celsius・・・が表示されればOKです。右っ...
**温度取得スクリプトの作成 [#ndbfe556]
/usr/sbin/smartctl -A /dev/hdaの結果から温度の値のみをス...
# vi /usr/local/mrtg-2/hdd_temp.sh
>新規に作成します。
#!/bin/sh
/usr/sbin/smartctl -A /dev/hda|grep Temperature_Celsius|...
MRTGは入力が2系統なためprintで同じデータを2つ出力していま...
実行権限を与える
# chmod 755 /usr/local/mrtg-2/hdd_temp.sh
**mrtg.cfgの編集 [#xd146d27]
# vi /usr/local/mrtg-2/lib/mrtg.cfg
>追加
### HDD Temperature ###
Target[htemp]: `/usr/local/mrtg-2/hdd_temp.sh`
MaxBytes[htemp]: 56
Options[htemp]: gauge, growright, absolute, integer, nop...
Unscaled[htemp]: dwmy
YLegend[htemp]: Temperature
ShortLegend[htemp]: deg.
LegendI[htemp]: TEMP
LegendO[htemp]: TEMP
Legend1[htemp]: HDD温度
Legend2[htemp]: HDD温度
Title[htemp]: HDDの温度
PageTop[htemp]: <H1>HDDの温度</H1>
**実行 [#v037865c]
# /usr/local/mrtg-2/bin/mrtg /usr/local/mrtg-2/lib/mrtg....
**インデックスページを作る [#rf8d606a]
# /usr/local/mrtg-2/bin/indexmaker --columns=1 \
--addhead="<META HTTP-EQUIV=\"Content-Type\" CONTENT=\"t...
/usr/local/mrtg-2/lib/mrtg.cfg > /home/httpd/html/mrtg/i...
*CPUの温度監視 [#r44d9d48]
ハードウェアのセンサ情報を取得するにはI2CとLM Sensorsが必...
初め、最新のI2C 2.9.1 と LM Sensors 2.9.1 でやったがうま...
ちなみに、PCはHITACHI FLORA 330 DK3です。このPCはACERのOE...
**lm_sensorsのインストール [#d21df0d6]
http://secure.netroedge.com/%7Elm78/index.html
# wget http://secure.netroedge.com/%7Elm78/archive/lm_se...
--16:37:54-- http://secure.netroedge.com/%7Elm78/archiv...
=> `lm_sensors-2.7.0.tar.gz'
secure.netroedge.com をDNSに問いあわせています... 206.22...
secure.netroedge.com[206.228.191.3]:80 に接続しています....
HTTP による接続要求を送信しました、応答を待っています......
長さ: 595,379 [application/x-tar]
100%[==============================================>] 59...
16:37:58 (156.57 KB/s) - `lm_sensors-2.7.0.tar.gz' を保...
# tar zxf lm_sensors-2.7.0.tar.gz
# cd lm_sensors-2.7.0
makeするのに.configファイルが必要なので、自分のマシンに合...
# ls /usr/src/linux/configs/
kernel-2.4.27-athlon-smp.config kernel-2.4.27-i586-smp....
kernel-2.4.27-athlon.config kernel-2.4.27-i586.config
kernel-2.4.27-i386-BOOT.config kernel-2.4.27-i686-smp....
kernel-2.4.27-i386-smp.config kernel-2.4.27-i686.config
kernel-2.4.27-i386.config
# cp /usr/src/linux/configs/kernel-2.4.26-i686.config /u...
# make
# make install
**センサの自動検出 [#c9bf8d37]
# prog/detect/sensors-detect
適当にEnterを押していく。
**起動してみる [#bdda57fd]
# prog/init/lm_sensors.init start
Starting up sensors: starting module __i2c-sis630__
starting module __i2c-isa__
starting module __eeprom__
starting module __sis5595__
starting module __it87__
...
-起動しない場合
# vi /etc/ld.so.conf
>に以下を追加
/usr/local/lib
<
# ldconfig
**センサ情報を見る [#oef3eab1]
# sensors
eeprom-i2c-0-50
Adapter: SMBus SIS630 adapter at f080
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 128
eeprom-i2c-0-51
Adapter: SMBus SIS630 adapter at f080
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 256
it87-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +1.74 V (min = +1.53 V, max = +1.87 V)
VCore 2: +2.56 V (min = +2.25 V, max = +2.75 V)
+3.3V: +6.64 V (min = +2.96 V, max = +3.60 V) A...
+5V: +5.17 V (min = +4.50 V, max = +5.48 V)
+12V: +11.84 V (min = +11.36 V, max = +13.80 V)
-12V: -27.36 V (min = -15.86 V, max = -13.40 V) A...
-5V: -13.64 V (min = -10.13 V, max = -9.44 V) A...
Stdby: +0.00 V (min = +4.50 V, max = +5.48 V) A...
VBat: +3.32 V
fan1: 0 RPM (min = 3000 RPM, div = 2) A...
fan2: 3924 RPM (min = 3000 RPM, div = 2)
fan3: 0 RPM (min = 3000 RPM, div = 2)
Temp1/MB: +76庵 (min = +20庵, max = +60庵)
Temp2/CPU: -79庵 (min = +20庵, max = +60庵)
Temp3: +55庵 (min = +20庵, max = +60庵)
Tempの値が可笑しいので修正します。ITE8705Fのドキュメント...
# vi /etc/modules.conf
>に以下を追加
options it87 temp_type=0x31
temp_typeをいろいろ変えてみる。
-(抜粋)doc/chips/it87の表
Legal values:
sensor1 sensor2 sensor3 ...
------- ------- ------- ...
diode diode diode ...
diode diode thermistor ...
diode thermistor diode ...
diode thermistor thermistor ...
thermistor diode diode ...
thermistor diode thermistor ...
thermistor thermistor diode ...
thermistor thermistor thermistor ...
しかし自分のPCではtemp_typeをどうやってもTemp2とTemp3がま...
Temp1/MB: +39庵 (min = +20庵, max = +60庵)
Temp2/CPU: +95庵 (min = +20庵, max = +60庵)
Temp3: +55庵 (min = +20庵, max = +60庵)
仕方ないのでTemp1のデータのみ使う。上の結果ではTemp1/MBと...
**不要なモジュールを読み込まないようにする [#l15c8813]
logを見るとエラーが出ているので温度取得に関係ないモジュー...
# vi /etc/sysconfig/lm_sensors
>
#MODULE_0=i2c-sis630
MODULE_0=i2c-isa
#MODULE_2=eeprom
#MODULE_3=sis5595
MODULE_1=it87
**自動起動の設定 [#q5a025e2]
起動スクリプトのコピー
# cp prog/init/lm_sensors.init /etc/rc.d/init.d/lm_sensors
# chkconfig lm_sensors on
リブートして動作することを確認する。
**CPU温度値の取得 [#rebc4ab9]
CPUの温度は
# cat /proc/sys/dev/sensors/it87-isa-0290/temp1
60.0 20.0 35.0
を見ることでも得られる。
なので、ここの値をスクリプトで取得してMRTGに渡すことにす...
# vi /usr/local/mrtg-2/cpu_temp.sh
>新規に作成します。
#!/bin/sh
awk '{print int($3)}{print int($3)}' /proc/sys/dev/senso...
MRTGは入力が2系統なためprintで同じデータを2つ出力していま...
実行権限を与える
# chmod 755 /usr/local/mrtg-2/cpu_temp.sh
**mrtg.confの編集 [#i4f61bc4]
# vi /usr/local/mrtg-2/lib/mrtg.cfg
>追加
### CPU Temperature ###
Target[ctemp]: `/usr/local/mrtg-2/cpu_temp.sh`
MaxBytes[ctemp]: 48
Options[ctemp]: gauge, growright, absolute, integer, nop...
Unscaled[ctemp]: dwmy
YLegend[ctemp]: Temperature
ShortLegend[ctemp]: deg.
LegendI[ctemp]: TEMP
LegendO[ctemp]: TEMP
Legend1[ctemp]: CPU温度
Legend2[ctemp]: CPU温度
Title[ctemp]: CPUの温度
PageTop[ctemp]: <H1>CPUの温度</H1>
**実行 [#h33e3dd5]
# /usr/local/mrtg-2/bin/mrtg /usr/local/mrtg-2/lib/mrtg....
何回か実行してエラーが出なくなればOK。
**インディクスページの作成 [#u4828302]
# /usr/local/mrtg-2/bin/indexmaker --columns=1 \
--addhead="<META HTTP-EQUIV=\"Content-Type\" CONTENT=\"t...
/usr/local/mrtg-2/lib/mrtg.cfg > /home/httpd/html/mrtg/i...
*CPUの温度監視(ノートパソコンの場合) [#wbbf3e6d]
ノートパソコンの場合、センサチップが搭載されていない場合...
以下は、IBM Thinkpad X23(低電圧版モバイルPentium III-M 86...
Thinkpad X23では、ACPIによりCPUの温度を取得できる。
**モジュールを組み込む [#vbf33dc6]
ACPI関係のモジュールを探す
# modprobe -l |grep acpi
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/asus_acpi.o
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/processor.o
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/thermal.o
/lib/modules/2.4.27-0vl7/kernel/drivers/acpi/toshiba_acp...
/lib/modules/2.4.27-0vl7/kernel/drivers/hotplug/acpiphp.o
thermal.oが関係しそうなモジュールなので、
# modprobe thermal
とやると組み込める。
lsmodでthermalがあればOK。
# lsmod
Module Size Used by Tainted: P
thermal 8068 0
:
:
/proc/acpiにthermal_zoneが現れているはずなので、
# cat /proc/acpi/thermal_zone/THM0/temperature
temperature: 49 C
でCPUの温度が表示される。
ちなみに、
# modprobe processor
を組み込むと、/proc/acpiにprocessorが現れて、
# cat /proc/acpi/processor/CPU/performance
state count: 2
active state: P0
states:
*P0: 733 MHz, 12500 mW, 500 uS
P1: 466 MHz, 9500 mW, 500 uS
でCPUの情報などを確認できる。
起動時に自動的に組み込まれるように、
# vi /etc/rc.d/rc.local
> 一番下に追加
modprobe thermal
あとは、上と同じようにシェルスクリプトで値を取得してMRTG...
* コメント [#e6ca8bcc]
#comment
ページ名:
検索
AND検索
OR検索
編集操作
一覧
単語検索
最終更新
バックアップ
ヘルプ
トップページ
http://kayanomori.net/
↑
アクセス数
本日:0人
昨日:0人
総数:0人
現在:2人
最新の20件
2022-07-16
投票箱
2022-01-30
FrontPage
2022-01-29
めも
2018-02-03
SandBox
PukiWiki
InterWikiName
FormattingRules
PukiWiki/1.4/Manual/Plugin/O-R
PukiWiki/1.4/Manual/Plugin/S-U
InterWiki
日本語
複数画像アップ掲示板 ECOUP(エコアップ) v1.31
日記/2006-12-12
日記
日記/2005-10-04
特定のオートコンプリート履歴だけを削除する
日記/2005-10-06
小ネタ集/WordPress
日記/2005-10-05
整形ルール
edit