- 追加された行はこの色です。
- 削除された行はこの色です。
* HDDの温度監視 [#lc171ce0]
smartmontoolsのインストール。
# apt-get install smartmontools
パッケージリストを読みこんでいます... 完了
依存情報ツリーを作成しています... 完了
以下のパッケージが新たにインストールされます:
smartmontools
アップグレード: 0 個, 新規インストール: 1 個, 削除: 0 個, 保留: 0 個
419kB のアーカイブを取得する必要があります。
展開後に 779kB のディスク容量が追加消費されます。
取得:1 http://updates.vinelinux.org 4.2/i386/plus smartmontools 5.38-1vl4 [419kB]
419kB を 0s 秒で取得しました (640kB/s)
変更を適用しています...
準備中... ########################################### [100%]
Note that you can use a configuration file /etc/smartd.conf to control the
startup behavior of the smartd daemon. See man 8 smartd for details.
Run "/sbin/chkconfig --add smartd", to start smartd service on system boot
1:smartmontools ########################################### [100%]
Run "/etc/rc.d/init.d/smartd start" to start smartd service now.
完了
smartdの起動。
# /etc/init.d/smartd start
Starting smartd: [ OK ]
自動起動の設定。
# chkconfig smartd on
# chkconfig --list smartd
smartd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
/dev/hdaの情報を表示
# smartctl -a /dev/hda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K100 series
Device Model: HTS541040G9AT00
Serial Number: MPB210X2G0BLJB
Firmware Version: MB2OA56J
User Capacity: 40,007,761,920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Sat Nov 29 11:10:27 2008 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
:
:
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 188 188 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 126
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 031 031 000 Old_age Always - 30503
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 112
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10
193 Load_Cycle_Count 0x0012 001 001 000 Old_age Always - 5051923
194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 33 (Lifetime Min/Max 15/56)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
:
:
>194 Temperature_Celsius・・・が表示されればOKです。右側の33という数字が現在の温度です。
シンボリックリンク作成。
# ln -s /usr/share/munin/plugins/hddtemp_smartctl /etc/munin/plugins/hddtemp_smartctl
設定ファイル変更。
# vi plugin-conf.d/munin-node
>
[hddtemp_smartctl]
user root
env.drives hda
env.args_hda --all -d ata
munin-nodeの再起動。
# /etc/init.d/munin-node restart
Stopping Munin Node agents: [ OK ]
Starting Munin Node: [ OK ]
*CPUの温度監視(ACPI対応パソコンの場合) [#ud1803c4]
VineSeedより、acpiをダウンロード。
# cd /usr/src/vine/SRPMS/
# wget http://www.ring.gr.jp/pub/linux/Vine/VineSeed/SRPMS.plus/acpi-0.09-
1vl5.src.rpm
--12:54:09-- http://www.ring.gr.jp/pub/linux/Vine/VineSeed/SRPMS.plus/acpi-0.09-1vl5.src.rpm
=> `acpi-0.09-1vl5.src.rpm'
www.ring.gr.jp をDNSに問いあわせています... 192.218.230.58, 160.26.2.178, 150.26.214.84, ...
www.ring.gr.jp|192.218.230.58|:80 に接続しています... 接続しました。
HTTP による接続要求を送信しました、応答を待っています... 200 OK
長さ: 88,204 (86K) [application/x-wais-source]
100%[==============================================>] 88,204 490.72K/s
12:54:09 (488.16 KB/s) - `acpi-0.09-1vl5.src.rpm' を保存しました [88204/88204]
ビルド。
# rpmbuild --rebuild acpi-0.09-1vl5.src.rpm
インストール。
# cd ../RPMS/i386/
# rpm -Uvh acpi-0.09-1vl4.i386.rpm
準備中... ########################################### [100%]
1:acpi ########################################### [100%]
acpiコマンドにて値が取得できるか確認。
# acpi -t
Battery 1: charged, 99%
Thermal 1: ok, 42.0 degrees C
Thermal 1: ok, 42.0 degrees C はCPUの温度。
シンボリックリンク作成。
# ln -s /usr/share/munin/plugins/acpi /etc/munin/plugins/acpi
munin-nodeの再起動。
# /etc/init.d/munin-node restart
Stopping Munin Node agents: [ OK ]
Starting Munin Node: [ OK ]
* コメント [#l88386d9]
#comment