ハードウェアのセットアップが完了したらVoyage MPDをインストールする。
インストール手順は、こことかここに解りやすく載っているので詳細は参照されたし。
ここでは簡単な流れだけ。
BRIX本体に、USBキーボード、HDMI接続のディスプレイ、ルーターに繋がっているLANケーブルを接続。
Voyage MPDのホームページより、Live CD(現時点での最新：0.9.5)をダウンロードしUSBメモリへ書き込み、USBメモリより起動する。
Voyage MPDが起動したら、
voyage login: root Password: voyage
でログインする。あとは、
root@voyage:~# ifconfig
でルーター(DHCP)より割り当てられたIPアドレスを確認する。
ここからは同じLAN上の他のPCから、TeraTermやPuTTYなどのターミナルソフトでVoyage MPDに接続する。
先ほど確認したIPアドレスにSSHで接続し、root/voyageでログインする。
インストール用のディレクトリを作成する。
root@voyage:~# mkdir /tmp/root /tmp/cf root@voyage:~# mount -o loop /lib/live/mount/medium/live/filesystem.squashfs /tmp/root root@voyage:~# cd /tmp/root
fdisk -lで接続されているディスクの構成を確認。
root@voyage:/tmp/root# fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes #内蔵SSD 255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 1025 MB, 1025024000 bytes #インストールイメージが入ったUSBメモリ 255 heads, 63 sectors/track, 124 cylinders, total 2002000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x005f8f51 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 2001999 999976 c W95 FAT32 (LBA)
インストールするSSD（/dev/sda）にパーティションを作成、フォーマットする。
root@voyage:/tmp/root# /usr/local/sbin/format-cf.sh /dev/sda
パーティションが作成されたか確認。
root@voyage:/tmp/root# fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes #内蔵SSD 30 heads, 63 sectors/track, 132312 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2575bf49 Device Boot Start End Blocks Id System /dev/sda1 2048 250069679 125033816 83 Linux #パーティションが作成された Disk /dev/sdb: 1025 MB, 1025024000 bytes #インストールイメージが入ったUSBメモリ 255 heads, 63 sectors/track, 124 cylinders, total 2002000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x005f8f51 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 2001999 999976 c W95 FAT32 (LBA)
インストールの開始。
root@voyage:/tmp/root# /usr/local/sbin/voyage.update What would you like to do? 1 - Create new Voyage Linux disk 2 - Update existing Voyage configuration 3 - Exit (default=1 [Create new Voyage Linux disk]):≪Enter≫ some mandatory options are unset, please enter them interactively Where is the Voyage Linux distribution directory? (default=/tmp/root):≪Enter≫ What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=2 [Select Target Profile - this overwrites current settings]):≪Enter≫ Please select Voyage profile: 1 - Keep existing settings 2 - 4501 3 - 4511/4521 4 - 4801 5 - 5501 6 - 6501 7 - ALIX 8 - APU 9 - Generic PC 10 - Notebook (pcmcia) 11 - WRAP (default=7 [ALIX]): 9 #普通のパソコンなので9を選択 What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=3 [Select Target Disk]):≪Enter≫ Partitions information major minor #blocks name 8 0 125034840 sda 8 1 125033816 sda1 8 16 1001000 sdb 8 17 999976 sdb1 7 0 77700 loop0 7 1 77700 loop1 Which device accesses the target disk [/dev/hde]? /dev/sda Which partition should I use on /dev/sda for the Voyage system [1]?≪Enter≫ Device information for /dev/sda1 device fs_type label mount point UUID ------------------------------------------------------------------------------- /dev/sda1 ext2 (not mounted) d00f5160-af4e-469d-a7c2-d3af2a97977e Where can I mount the target disk [/tmp/cf]? ≪Enter≫ What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=4 [Select Target Bootstrap Loader]):≪Enter≫ Which loader do you want (grub or lilo) [grub]?≪Enter≫ Which partition is used for bootstrap [1]?≪Enter≫ What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=5 [Configure Target Console]):≪Enter≫ Select terminal type: 1 - Serial Terminal 2 - Console Interface (default=2 [Console Interface]):≪Enter≫ What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=6 [Partition and Create Filesystem]):≪Enter≫ What shall I do with your Flash Media? 1 - Partition Flash Media and Create Filesystem 2 - Use Flash Media as-is (default=1 [Partition Flash Media and Create Filesystem]): 2 What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=7 [Copy Distribution to Target]):≪Enter≫ Configuration details: ---------------------- Distribution directory: /tmp/root Disk/Flash Device: /dev/sda Installation Partition: /dev/sda1 Bootstrap Partition: /dev/sda1 Will be mounted on: /tmp/cf Target system profile: Generic PC Target console: standard Bootstrap installer: grub Bootstrap partition: /dev/sda1 OK to continue (y/n)? y Ready to go .... Copying files .... done Removing pcmcia from update-rc.d update-rc.d: using dependency based boot sequencing Removing dnsmasq.pxe.conf in /etc/dnsmasq.more.conf Reconfiguring resolvconf Updating /etc/hosts Installing grub Copy grub files from /tmp/cf to /tmp/cf/boot/grub Setting up grub under chroot /tmp/cf copyfiles.sh script completed What would you like to do? 1 - Specify Distribution Directory 2 - Select Target Profile - this overwrites current settings 3 - Select Target Disk 4 - Select Target Bootstrap Loader 5 - Configure Target Console 6 - Partition and Create Filesystem (default=8 [Exit]):≪Enter≫
USBメモリを取り外し再起動する。
root@voyage:/tmp/root# reboot Broadcast message from root@voyage (pts/0) (Sun Jan 18 06:17:28 2015): The system is going down for reboot NOW!
次はVoyage MPDの設定を行う。
→part3へ